Raritan          Rose
Search the SRS site
  
Call us at 800.910.6789


Sentry products enable remote power control (off, on, reboot, graceful shutdown) of servers and internetworking devices in remote equipment rooms, POP sites, Telco central offices and other co-location facilities. Sentry products are used in data centers, network rooms, switching offices, wiring closets and remote offices locations and are for a variety of applications, including sever management, data center management, backbone equipment and Customer Premise Equipment.
Sentry Commander PT40


Remote Power Management & Pass-Thru Console Port Access

The Sentry Commander PT40 uniquely combines Remote Power Management and Pass-thru Console Port Access into one enclosure and interface. The Pass-Thru Port Access integrates secure, in-band and/or out-of-band "One-to-Many" asynchronous communications for serial connections to up to 4 inter-networking device console ports for remote problem determination.

Sentry Commander PT45


The PT45 operates distributed Inline Power Modules (IPM’s), which provide four distinct advantages:
  • Independent Power: One-to-one ratio between power input, IPM & device eliminates single point-of-failure.
  • Greater distance: each IPM can be up to 1000’ from the PT45 Commander.
  • Mixed-Amperage: 10-Amp and 20-Amp IPMs to control both severs & network gear.
  • Mixed Voltage: 110 VAC, 230 VAC and –48 VDC IPMs can be controlled from one PT45.
Sentry Commander PT49


The PTXL Console Port Expansion Unit

Expand the management capabilities of the PTXL with the Commander PT49 to remotely manage both servers and network equipment units. The PT49 connects to a PTXL via an RS-232 serial link to provide remote console management as well as remote power management of each connected device.

Sentry Power Tower XL


The Sentry Power Tower XL (PTXL) combines intelligent power distribution, remote management, power monitoring and environmental monitoring into a single, vertical form-factor solution. The PTXL is a fully integrated Solution for Data Center Equipment Cabinets and is secured with SSL and SSH encryption.
Sentry Dual-Feed PT XL


The Sentry Dual-Feed Power Tower (PTXL) is designed for servers and other devices with dual or redundant power supplies:
  • 15, 20 or 30-Amp power input feed with straight-blade or twist-lock connectors. 120V or 230V.
  • Unparalleled communications access and management via HTML, SNMP, Telnet, Out-of-Band (internal or external modem); or RS-232 serial control.
Sentry Fail-Safe PT XL


The Sentry Power Tower XL (PTXL) Fail-Safe provides fail-over redundancy to single or dual-power supply servers and network devices. The unique ability to carry loads on the A circuit, the B circuit or both (and to remotely manage the outlets) is an exclusive feature of the PTXL Fail-Safe.
  • It does not prohibit load balancing between the two supplied circuits
  • With the PTXL Fail-Safe, the actual load switched is half that of a standard ATS
  • The PTXL Fail-Safe supports both single and dual-power supply servers